Steinel Flood Light XLED Home Curved Anthracite

Code: STE012076

Wesco Electrical Ltd stockist of Steinel STE012076 Flood Light XLED Home Curved Anthracite. Full range available from stock. Order Online Today!

79.44 Ex. VAT
WEEE Charge of €0.05

In Stock


Min Qty: 1

QtyAdd

Steinel STE012076

Flood Light XLED Home Curved Anthracite  

Illuminating compact model. Sensor LED floodlight XLED curved with 9 W, compact and discreet lighting solution for building entrances, pathways and co., attractive luminous efficiency (1125 lm) requiring very little energy, sensor reach of up to 8 m, tilting range of +-30°.
Attractive buildings need attractive floodlights.
The compact outdoor floodlight XLED curved is ideal for illuminating building entrances and pathways. Yet the practical floodlight doesn't only satisfy safety and security needs, in conjunction with the house facade it also unfurls a pleasantly charming lighting effect. Both the sensor and the entire outdoor floodlight come in a pleasingly understated, unobtrusive look, clearly leaving center stage to the lighting in setting off buildings and outdoor areas with masterful proficiency.


Colour of light White
Colour temperature 3000 K
Energy efficiency class of the built-in lamp A++, A+, A (LED)
Lamp holder Other
Luminous flux 1125 lm
Max. system power 10 W
Type of control gear LED operating device current-controlled
Adjustability Rotatable
Beam angle Extreme wide beam >80°
Built-in diameter - mm
Built-in height/depth - mm
Built-in length - mm
Built-in width - mm
Colour housing Anthracite
Control gear included Yes
Degree of protection (IP) IP44
Dimming 0-10 V false
Dimming 1-10 V false
Dimming DALI -
Dimming DMX false
Dimming DSI false
Dimming GPRS false
Dimming LineSwitch false
Dimming RF false
Dimming Sine Wave Reduction false
Dimming Touch and Dim false
Dimming Zigbee false
Dimming depending on control gear -
Dimming mains voltage modulation false
Dimming manufacturer's proprietary system false
Dimming phase cut-off false
Dimming phase cut-on false
Dimming potentiometer (integrated) false
Dimming programmable -
Dimming with push-button false
Fit for monitor workplace acc. EN 12464-1 false
Height/depth 107 mm
Impact strength IK00
Lamp type LED not exchangeable
Length 120 mm
Light distributor -
Light outlet Direct
Light sharing Symmetric
Luminous intensity - cd
Material cover Plastic, opal
Material housing Plastic
Nominal voltage 220...240 V
Outer diameter - mm
Photobiological safety according to EN 62471 -
Protection class II
Rated luminous flux acc. IEC 62722-2-1 1125 lm
Reflector None
Surface brushed -
Surface protection -
Voltage type AC
Width 160 mm
With light sensor Yes
With light source Yes
With movement sensor Yes
Colour consistency (McAdam ellipse) -
Colour rendering index CRI 80-89
Conductor cross section - mm²
Connectable conductor cross section - mm²
Connection type Other
Covering of the luminaire with thermally insulating material possible false
Degree of protection (NEMA) -
Energy efficiency class of the provided exchangeable built-in lamp A++
Filament test according to IEC 60695-2-11 650 °C - 30 s
Highest energy efficiency class of the exchangeable lamp A++
LED nominal current at constant current - mA
Lamp efficacy 112,5 lm/W
Lowest energy efficiency class of the exchangeable lamp A
Luminaire efficacy 112,5 lm/W
Luminaire with limited surface temperature, sign "D“ false
No dim function -
Number of poles -
Power factor -
Power supply energy efficiency index (EEI) -
Rated ambient temperature acc. IEC62722-2-1 -20...50 °C
Rated life time L70/B10 at 25 °C - h
Rated life time L70/B50 at 25 °C - h
Rated life time L80/B10 at 25 °C - h
Rated life time L80/B50 at 25 °C - h
Rated life time L90/B10 at 25 °C - h
Rated life time L90/B50 at 25 °C - h
Suitable for built-in mounting -
Suitable for ceiling mounting false
Suitable for clamp-mounting false
Suitable for lamp power 10 W
Suitable for light-track mounting false
Suitable for low voltage cable system false
Suitable for number of lamps -
Suitable for pedestal/floor mounting false
Suitable for surface mounting -
Suitable for suspended mounting false
Suitable for traverse mounting false
Suitable for wall mounting Yes
Total harmonic distortion -
Type of wiring -

Sign up for our newsletter

We only use your email address to add you to our mailing list for receiving our newsletters(monthly). This information is only kept in our mailing list and not for any other purposes than for contacting you with our newsletters.

Thank you for your submission! You will hear from us soon.